How to use the new G3

How to use the Glass DynaVap, The G3 in three easy steps!

Step 1: Load Your G3

Start by removing the cap from your G3. Load your preferred herb into the chamber—ground material works best, though it doesn’t need to be powder-fine. Once packed, replace the cap securely.

Step 2: Heat It 

Hold the G3 horizontally and rotate it between your fingers—think of it like playing a tiny violin. Using a torch lighter, aim the flame at the cap, not the glass body, keeping it at a slight angle. Continue to rotate and heat evenly.

Listen for the click—that’s your signal the device is at the perfect temperature. Inhale and enjoy.

Step 3: Cool Down & Repeat

After your session, you’ll hear another click—this means the G3 has cooled. At this point, you can:

• Reheat it for another cycle

• Or remove the cap, clear the chamber, and reload

That’s all there is to it!