How to Assemble the DynaVap M7

Getting started with your new DynaVap M7? Here’s a quick step-by-step guide to assembling it properly so you're ready to snap into smooth extractions in no time.

? What’s Included with the M7

• Captive Cap

• M7 Tip

• M7 Stem

• M7 Condenser

• Four O-Rings

  • 2 for the tip

  • 2 for the condenser (one small, one large)

? Step-by-Step Assembly

1. Prep the Condenser

   • Place the small o-ring into the inner double groove on the condenser.

   • Place the larger o-ring near the end of the condenser.

2. Insert the Condenser

   • Slide the condenser into the logo-end of the stem.

   • Press until the large o-ring seats flush with the stem.

   • Tip: Use a little DynaWax to lubricate the tip o-rings—it makes assembly easier and smoother.

3. Add the Tip

   • Insert the tip into the stem. You’ll feel or hear it click into place.

4. Cap It

   • Place the Captive Cap onto the tip.

And that’s it—your DynaVap M7 is ready to go!