How to Assemble the DynaVap M7

Just picked up the DynaVap M7? Here’s how to put it together like a pro and get ready for smooth extractions in minutes.

What’s in the Box?

• Captive Cap

• M7 Tip

• M7 Stem

• M7 Condenser

• 4 O-Rings

  • 2 for the tip

  • 2 for the condenser (one slightly larger than the other)

 Assembly Instructions

1. Prep the Condenser

   • Place the small o-ring into the inner double groove of the condenser.

   • Place the larger o-ring near the end of the condenser.

2. Insert into Stem

   • Slide the condenser into the logo-end of the stem.

   • Push until the larger o-ring sits flush.

   • Pro Tip: A bit of DynaWax makes o-ring insertion easier.

3. Add the Tip

   • Gently push the tip into the stem until you feel it click into place.

4. Top it Off

   • Place the Captive Cap onto the tip.

And just like that—your M7 is ready for action. Easy to assemble, easier to enjoy.