I Just Received My New DynaVap, What do I do now?

DYNAVAP USE AND CARE from Dynavap on Vimeo.

Welcome to the DynaVerse! If you're new to DynaVap, we're here to help. 

DynaVap is a vaporizer that doesn't require a battery; instead, it's heated with a torch or induction heater. If you already have one of these, great! If not, we recommend getting one to use with your device.

How does battery-free work, check out this video on How the DynaVap Works. 

Before using your device, please read these instructions carefully. When you receive your package, please examine it to make sure everything is in satisfactory condition. If you have any damaged or unsatisfactory items, please contact us at customer support so we can fix the issue. If you're no longer interested in an item, you can submit a return request through our self-serve page.

All of our M and B devices come with a snap stash, while the Omni and VonG(i) devices come with a wooden DynaStash. Our devices have interchangeable parts, so you can mix and match tips and stems. While different models may require additional or fewer components, the core parts of every DynaVap device remain consistent. 

We hope this information helps you enjoy your DynaVap device to the fullest. If you have any further questions or concerns, please don't hesitate to contact us.

The Anatomy of The DynaVap

What's the difference between the devices?

What are the differences between the Tips?

I JUST RECEIVED MY NEW DYNAVAP

STEP 1: Inspecting Your Device: A Comprehensive Checklist

Please follow these instructions to inspect your device thoroughly. It is essential to carefully examine each component to familiarize yourself with your device and identify any potential issues. Here is a list of things to check:

1. Does your device have a cap?

- Is the cap undamaged and free from dents?

- Note: Some caps may have dark edges due to the laser cutting technique. Please refer to the accompanying clip for more information.

2. Look into the tip:

- Is there a CCD in place?

3. Remove the tip:

- Check if the high-temperature o-rings are correctly positioned and fully intact.

- Please note that the B model does not require o-rings on the tip.

4. Look into the stem:

- Can you see a condenser inside?

5. Disassemble and reassemble the device:

- This step ensures easy assembly and disassembly in the future.

6. Inspect the entire device:

- Look for any manufacturing issues that need attention and require proper care.

By following these steps and paying attention to the details mentioned, you can thoroughly inspect your device and ensure its proper functionality.

STEP 2: Cleaning Your Device

Note: While we clean our devices, it's important to consider the following:

- Our devices and parts are small, and machining oils can get trapped, resulting in residue.

- All our devices are hand-assembled, and we use DynaWax to facilitate smoother assembly. Therefore, some residue may be present on the device.

After inspecting your device, it is crucial to clean it thoroughly before use. Follow these steps to ensure proper cleaning:

1. Wash your device:

- You have the option to either take it apart or leave it assembled.

- To wash your device, you can use one of the following methods:

  a. Run it under hot water with dish soap.

  b. Give it a quick bath in isopropyl alcohol (IPA) and rinse with water.

  c. Place it in the dishwasher (excluding BB and other glass stems). DynaVap devices are dishwasher safe.

- Important: The cap is not dishwasher safe. Do not soak or submerge the cap in any cleaning solution or water.

2. Caution when disassembling:

- If you choose to take your device apart completely, exercise caution. the CCD and o-rings are small and can be easily lost if not handled carefully.

- If you notice difficulty during disassembly, try a twist and pull motion. If you still cannot take it apart, please contact customer support for assistance. 

3. Cleaning the cap:

- To clean the cap, use a q-tip dipped in isopropyl alcohol solution or water.

- Swab the inside of the cap thoroughly to remove any residue.

4. Ensure complete drying:

- Allow your device to dry completely before using it.

5. Reassemble your device:

- If you notice difficulty during reassembly, try using some lubricant to slide the parts together, like our DynaWax. Any nontoxic, non-flammable, food grade lubricant should do just fine. 

STEP 3: Testing Your Cap

Before using your device, it is important to test the functionality of your cap. Follow these steps:

1. Dry run:

- Perform a dry run to ensure your cap is functioning correctly.

- Do not pack the tip and heat the cap until you hear a click.

You can find more information about our caps here. 

STEP 4: Cap Fitment Test

Test the fitment of your cap on the device by following these steps:

1. Place the cap on your device.

2. Give your device a shake.

3. Does the cap slide off easily?

- If your cap is loose and slides off easily, refrain from using the device until making the following adjustments.

Watch How to Tighten/Loosen Cap to adjust your cap for fitment. 

- If the cap is too loose or tight, make the necessary adjustments using the following steps.

- If these adjustments do not resolve the issue or if you're experiencing this problem with the Armored cap (due to the thickness of the material), please contact customer support for assistance.

By following these steps, you can ensure that your cap is functioning properly and fits securely on your device to avoid any injury or burning.

Our DynaStashs provide a magnet on them as a cooling station for your DynaVap to rest on and to be able to remove the cap with our injury. If you notice your cap has gotten stuck on your tip and cannot be removed, please let us know. 

After you have cleaned your device and tested your cap and everything seems to be functioning as it should, off to the races! 

*Please know, our devices may take some time to learn and understand. Practice makes perfect. Do not hesitate to reach out for advice or assistance, we are here to help.